|
|
 |
|
 Input Voltage: |
90~135VAC (input 115VAC), 180~260VAC (input 230VAC) |
 |
Input Frequency: |
47~63Hz |
|
Input Current: |
9A for 115VAC at without AC outlet; 5A for 230VAC |
|
Inrush Current: |
150A max. at cold start |
|
Switching Frequency: |
30KHz typical |
|
Hold Up Time: |
16ms min. |
|
Brown Out Voltage: |
100VAC max. at 60Hz |
|
Output Power: |
400W at 40°C |
|
Power Up Time: |
< 20ms for +5V output voltage |
|
Power Good: |
The power good signal will not be higher than 100~500ms after the +5V output stabilizes at its operating value when the unit is turn on |
|
Power Fail: |
The TTL compatible signal will go down at least 1ms before +5V below 4.75V |
|
PS ON Signal: |
TTL compatible signal (active low) |
|
Efficiency: |
70% min. at full load (AC input 230V) |
|
Altitude: |
10,000 feet |
|
Protection |
Over Voltage: +5V from 5.5~6.8V
Over Load: Total output from 110% min. to 160% max. |
|
Thermal System: |
Forced air ventilation by DC ball bearing cooling fan; fan status monitoring is optional |
|
Temperature Coefficient: |
+0.05% per°C |
|
Temperature: |
Operating: 0~40°C
Storage: -20~+50°C |
|
Humidity: |
Operating: 10~90% RH
Storage: 5~90% RH |
|
Dimensions: |
15.0 x 14.0 x 8.6 cm |
|
MTBF: |
100,000 hrs. |
|
|
