|
|
 |
|
 Input Voltage: |
90~265VAC |
 |
Input Frequency: |
47~63Hz |
|
Inrush Current: |
Not exceed 30A at 115VAC input or 60A AC input, at cold start 25°C |
|
Load Range: |
When all outputs are at 60% rated load condition, the +5V output is set between 4.90~5.10V and all other outputs are within the specified voltage accuracy range |
|
Ripple And Noise: |
Peak to peak ripple and noise for each output is < 1% of each output voltage at rated load 115~230VAC |
|
Line Regulation: |
< +/-1% at rated load with +/-10% change in input voltage |
|
Load Regulation: |
The output voltage load regulation is less than the values on the table when each output loading changes +/-40% from 60% rated load while all other outputs at 60% rated load |
|
Hold Up Time: |
14ms typ. from the last AC line charging pulse to the point when +5V drops down to +4.75V |
|
Output Power: |
Total DC continuous power is whthin 200W at 40°C ambient temperature. If the input voltage is < 100VAC, total DC continuous power should not exceed 180W |
|
Power Good: |
Goes high 100~500ms after all DC output are ready |
|
Power Fail: |
Goes low 1ms before any DC output falls |
|
Efficiency: |
> 65% at nominal line and rated load |
|
Altitude: |
10,000 feet |
|
Protection |
Built-in crowbar circuit automatically shuts down outputs to avoid damaging external circuits. Trip point of O.V.P. circuit is between 5.7~7.0V |
|
Temperature: |
Operating: 0~70°C
Storage: -40~+75°C |
|
Humidity: |
Operating: 5~95%; non-condensing at 40°C |
|
Connectors: |
AC Input/Output: Meets IEC 320/CEE 22 standard
Tab Terminals: Female 0.250" x 0.032"
CPU Board: Alex 8500-06 or equivalent device
3.5" Disk Drive: AMP 1-480424-0/171822-4 or equivalent device |
|
Dimensions: |
14.0 x 15.0 x 8.62 cm with +/-0.8mm and +/-0.4mm tolerance between mounting holes |
|
MTBF: |
156,598 hrs. |
|
|
