寶晟科技股份有限公司

Specifications

Input Voltage:

85~264VAC

Input Frequency:

47~63Hz

Input Current:

3A at 115VAC or 1.5A at 230VAC max. capacitors

Inrush Current:

Not exceed 30A at 115VAC input or 60A at 230VAC input, cold start at 25°C

Load Range:

With +5V output set between 4.95~5.05V and all output at 60% rated load, and all other outputs in the accuracy range, max. load can not > 80W convection cooling and > 100W forced air cooling

Ripple And Noise:

Peak to peak ripple and noise for each output is < 1% of each output voltage at rated load

Line Regulation:

< +/-1% at rated load with +/-10% change in input voltage

Load Regulation:

< +/-1% for +5V, < +/-5% for other outputs with +/-40% change in measured output loading from 60% rated load and other outputs at 60% rated laod

Hold Up Time:

> 16ms at 115VAC input and rated load

Efficiency:

> 70% at nominal line and rated load

Altitude:

10,000 feet

Protection

Short Circuit: Hiccup mode against short circuit or over load conditions auto recovery to normal after wrong conditions are removed
Output: Built-in crowbar circuit shuts down outputs to avoid damage. Trip point of over voltage protection is between 5.7~7.0V AC line ON/OFF restarts and recovers the unit from over voltage protection

Temperature:

Operating: 0~50°C, requires forces air of 30CFM for outputs > 80W
Storage: -20~+70°C

Humidity:

Operating: 5~95%; non-condensing at 40°C

Dimensions:

15.24 x 8.38 x 3.8 cm within +/-0.4mm tolerance

MTBF:

283,179 hrs.

Safety Standards

Safety:

UL 1950, CSA 22.2 No.234, VDE EN 60 950

EMI:

FCC Class B, EN55022B

EMS:

Level 3 of IEC-801, 802, 803, 804

Input

AC Line-1

AC Line-2

GND

Output

1~3

+5V

4~7

GND

8~9

+12V

-12V

-5V

N/C

Output

Min. Load

Rated Load

Max. Load

Tolerance

+5V

10A

+/-0.05V

+12V

3.5A

+/-0.75V

-12V

0.5A

+/-0.75V

-5V

0.5A

+/-0.25V